<<<< Back

Land Rover Discovery Tire Fitment Guide

Fitting is for "Series I" Discoveries only (1989 to 1998).
* Sizes are as per B.F.Goodrich M/T, A/T Trac-Edge (where available) courtesy of BFGoodrich
* Actual modfications required my vary by tire make.
* Non BFG tires uses theoretical data as explained below.
* Some information is unconfirmed.  Please e-mail me if you know better:  red90 ampersand red90.ca  “Spam blocking, replace ampersand with @ and no spaces”

Size

Width
(inches)

Diameter
(inches)

Tread Width
(inches)

Rev/Mile

Speed
Change
(%)

Basis

Vehicle Modications Required

205/80R16

8.1

28.9

~6.2

~720

0

Theory

None (stock)

235/70R16

9.5

28.9

7.7

720

0

M/T

None (stock)

225/75R16

8.9

29.5

7.0

705

2

M/T

None

245/70R16

9.8

29.5

8.0

705

2

A/T

None

30x9.5R15

9.8

29.9

7.4

696

3

M/T

Possible rear fender trimming

215/85R16

8.5

30.6

6.4

678

6

Trac

Possible rear fender trimming

245/75R16

9.6

30.6

7.6

680

6

M/T

Rear fender trimming (from my car)

31x10.5R15

10.9

30.5

8.2

673

7

M/T

Rear fender trimming
Possible steering stops
Spacers needed for spare tire.

7.50R16

8.7

32.1

6.4

654

10

Trac

Rear fender trimming
Possible steering stops and bump stop height.

235/85R16

9.3

32.0

7.3

650

11

M/T

Rear fender trimming
Front endcap trimming
Steering stops
Possible bump stop height.

265/75R16

10.7

31.7

8.4

656

10

M/T

Rear fender trimming
Front endcap trimming
Steering stops
Possible bump stop height.
Spacers needed for spare tire.

255/85R16

10.5

33.3

7.9

625

15

M/T

Rear fender trimming
Front endcap trimming
Steering stops
Bump stop height.
Possible front fender trimming.
Spare tire will not fit on stock carrier.

285/75R16

11.8

33.0

8.9

630

14

M/T

Rear fender trimming
Front endcap trimming
Steering stops
Bump stop height.
Front fender trimming.
Spare tire will not fit on stock carrier.

Metric system is based on:

"Width (millimeters)" / "Aspect Ratio (percent)"  "R for radial" "Rim Size (inches)"

Diameter (inches) = width / 25.4 * 2 * aspect ratio / 100 + rim size
i.e. for 245/75R16
245 / 25.4 * 2 * 75 / 100 + 16 = 30.47"

Width (inches) = width / 25.4
i.e. for 245/75R16
245 / 25.4 = 9.65"